How does a ground source heat pump work?
A ground source heat pump circulates a mixture of water and antifreeze around a loop of pipe - called a ground loop - which is buried in the garden. Heat from the ground is absorbed into this fluid and is pumped through a heat
exchanger in the heat pump. Low grade heat passes through the heat pump compressor and is concentrated into a higher temperature useful heat capable of heating water for the heating and hot water circuits of the house. Ground loop fluid, now cooler, passes back into the ground where it absorbs further energy from the ground in a continuous process while heating is required.
The length of the ground loop depends on the size of your home and the amount of heat you need - longer loops can draw more heat from the ground, but need more space to be buried in.
Normally the loop is laid flat, or coiled in trenches about two metres deep, but if there is not enough space in your garden you can install a vertical loop down into the ground to a depth of up to 100 metres for a typical domestic home.
Unlike gas or oil boilers, heat pumps deliver heat at lower temperatures over much longer periods. This means that during the winter they may need to be left on 24/7 to heat your home efficiently. It also means that radiators should never feel as hot to the touch as they would do when using a gas or oil boiler.
Sizing of the heat pump and the ground loops is essential for the operation of the system. If sized correctly a GSHP can be designed to meet 100% of space heating requirements. Please note that sizing is a job for specialists and heating needs should be properly assessed. The sizing of a system is very sensitive to heat loads and should therefore be installed into properties with high-energy efficiency standards, particularly new build. It is a good idea to explore ways of minimising space heating and hot water demand by incorporating energy efficiency measures
Air and water source heat pumps
These systems use similar principles to ground source heat pumps to extract heat from air or water instead of the ground.
Air source heat pumps can be fitted outside a house and generally perform better at slightly warmer air temperatures. Water source heat pumps can be used to provide heating in homes near to rivers, streams and lakes.